- Contact Person : Mr. Yang George
- Company Name : Hangzhou Haishun Pharmaceutical Machinery Co., Ltd.
- Tel : 86-571-63162278
- Fax : 86-571-63162269
- Address : Zhejiang,Fuyang,No.117,Golf Rord,High and new tech Industrial Park,Fuyang,Zhejiang,China
- Country/Region : China
Related Product Searches:Jecketed vessel with Wheels,High Quality,Jecketed vessel, tilting jacketed kettle,HSJT
Item: | Jecketed vessel with Wheels |
Volume : | 100L-1000L or As customer's demands. |
Material : | High quality SUS 304 or 316L |
Payment : | T/T. L/C |
Package : | Wooden case or As customer's demands. |
MOQ : | 1 PC |
Port of shipment | Ningbo or Shanghai available |
Delivery time : | Within 35~ 50days after down payment |
Guarantee | 24 months against the date of B/L |
♣Specification
1.Volume:100L-1000L
2.Material:Whole SS304 construction3
3.Tilting type
4.Open top with hinged lid
♣Thickness
Inner:6mm
Jacket:4mm
Cladding:3mm
Insulation:Rock Wool 50mm
♣Steam Heating
Agitation device
Frame Mixer with Teflon Scrapers
0-40Rpm,VSD(Speed control)
Siemens Motor with Reducer;380v,3ph,50hz
We can also make the jacketed kettle or jacketed boiler according to your special demands...
♥service:
1)we will supply you with drawing before manufacturing. |
2)we will firmly manufacture according to the drawing. |
3)we will be in charge of installation. |
4)we will send you our fittings for free if it is broken bt accident during 2 years. |
♣ Head and the inner tank weld detection
1.Air and water to the tank→2.Hold pressure for 12 hours → 3.Spray soapy water in the head and the inner tank of the weld
→4.If leakage, there will be a soap bubble on the head and the inner tank of the weld
♣ Conical bottom and inner tank weld detection
1.Cheer to the insulation layer → 2.Brush soapy water in the tank internal
→3.If leakage, there will be a soap bubble on the Conical bottom and the inner tank of the weld
Use attention security item
Intake should be slow to open the intake valve until the required pressure
After the stop use, pays attention to the clamp cover in puts the excess water
Maintenance
♣Pressure gauge and relief valve should be checked on a regular basis, such as failing to timely replacement or repair
♣When cleaning the fermentation tanks, scrub with a soft brush, do not scratch with a hard device, so as not to damage the surface of the fermenter
Supporting instrument calibration once a year, in order to ensure that the normal use
♣Electrical, instrumentation, electrical equipment, such as direct contact with the water and steam to prevent moisture
♣Devices to stop when used, should be cleaned in time, ranked best of fermentation tank and the water in the pipeline; remove fermentation tank covers and hand hole screws, prevent permanent deformation of sealing rings.
♣If the fermentation tank does not use temporarily, then must carry on to the fermentation pot disappears spatially, and drains away in the pot and various pipelines excess water
Flagship product
Jecketed vessel with Wheels